You May Also Likeback to top
detailsback to top
q & aback to top
Do you have questions about this product? 4 easy ways to get the answers you need:
get answers from real customers and in-house experts with AnswerBox.
Q:Does this gauge have a light in it?Asked on 4/26/2010 by pete from grand forks,nd
A:no im pretty sure it doesent you have to install one behind itAnswered on 5/12/2010 by Reece from newark oh
A:I just received this gauge and it does have a lamp installed.Answered on 5/19/2010 by Dave from Kansas
Q:I have this guage and need the wiring diagram - can you help?Asked on 1/12/2010 by Mitch from Marco Island, FL
A:One thing to remember when installing this gauge you need a good ground, a battery ground is the best source. You have to use a power source from the ign. or use a toggle switch and run your main power off of it. Simple design simple to install look at the old one and run wiring like it is..Answered on 6/13/2012 by Sport400 from Springtown, Texas
A:Please call our tech support line at 1-888-683-7866 and we can do a conference call with teleflex and get you set up with the proper directions.Answered on 1/14/2010 by Bryant from Tech
Q:I just had a 2010 4-stroke yamaha 225hp installed on my bay boat. My old guages, included my fuel guage, were yamaha brand guages. The old fuel guage was a combination speedometer - fuel guage (yamaha brand). I still have my two leads (wires) going to my fuel tank. I need to replace only the fuel guage and wanted to know if this Teleflex Eclipse Fuel guage would work.Asked on 11/30/2009 by Jmo
A:The fuel gauge requires that the sending unit be calibrated to 32-240 ohms which is an american setting for sending units and fuel gauges. The only other setting that a fuel sending unit can be is a european setting which nothing in america is sold to be set to, so you do not have to worry about that. All Teleflex fuel gauges will work with a fuel sending units sold in America whether a reed sending unit or float style sending unit. In other words yes it will work on your application as long as your sending unit it set to 32-240 ohms.Answered on 12/3/2009 by Justin from Overton's Technician
Q:Will this work in my 1996 Bayliner Capri 2050?Asked on 11/1/2009 by mickey from fredericksburg, va
A:We would need further information regarding the type of motor you have. Please contact our technical department at 1.800.334.6541 for further information.Answered on 11/3/2009 by Jordan from Overton's
Q:is this gauge 240-30 ohm ?Asked on 10/15/2009 by Anonymous
A:Yes. 240 ohms empty, full 30 ohmsAnswered on 10/21/2009 by marty from overtons tech
Q:Does this guage work with the Moeller below deck tanks with Stewart Warner sending units already on the tanks?Asked on 9/22/2009 by The Giant from Fargo, ND
A:As long as your sending unit operates at 33 ohms at full and 240 ohms at empty. As long as your sending unit will provide readouts at these ohms then it will work with the sending unit.Answered on 9/28/2009 by JUSTIN from OVERTON'S TECHNICIAN
Q:I have a 1995 Master Craft Ski boat with a 33 gallon tank and I need the wiring skematic from the sending unit to your fuel gauge?Asked on 6/17/2009 by Cookie
A:Please contact our tech department. 1-800-334-6541Answered on 6/18/2009 by Casey Marine Buyer from Overtons
Q:could this part be used for a tracker 1995 boatAsked on 5/26/2009 by Anonymous from brookfield, il
A:Yes as long as your sending unit operates at 33 ohms at full and 240 ohms at empty. As long as your sending unit will provide readouts at these ohms then it will work with the sending unit.Answered on 2/2/2011 by Justin from Overton's
Q:will this fit a 1996 sea ray laguana dual console with a 200 outboard mercury motor. how difficult is it to installAsked on 5/7/2009 by matt from new jersey
A:The Teleflex Eclipse Fuel Gauge is a universal gauge that will come with all necessary instructions to help you properly connect this fuel gauge to your sender. I have also listed the dimensions of the gauge below:
Bezel Diameter: 2.45"
Gauge Housing Diameter: 2.13"
Distance from Back Edge of Bezel to End of Longest Stud: 2.50"
Bezel and Lens Combined Protrusion from Dash: .44"
If you have any further questions or concerns please contact us here at Overton's at 1-888-OVERTON and any of our Technical Product Specialist will be glad to assist you.Answered on 5/27/2009 by Brooks, Marine Buyer from Overtons
Q:What is the outside diameter of the gauge face? What is the diameter of the instrument itself behind the face, i.e. what size hole is needed in dashboard? JCAsked on 5/5/2009 by Jim from Alt Spgs, FL
A:The outside diameter of the gauge face for the Teleflex Eclipse Fuel Gauge is 2.45" and the diameter of the gauge housing is 2.13". If you have any further questions or concerns please contact us at 1-888-OVERTON and any of our Technical Product Specialist will be glad to assist you.Answered on 5/27/2009 by Brooks, Marine Buyer from Overtons