Stiletto 3-Blade Propeller, Pressed Rubber Hub / Stainless Steel, 14.25 dia x 23 pitch, Right Hand
Prices, promotions, styles and availability may vary by store and online.
Durable 15-5 ph one piece stainless steel casting
High-rake, progressive pitch configuration
Bestoverall performance at all throttle levels
The unique high-rake, progressive pitch configuration is designed to help most boats achieve their best overall performance at all throttle levels; low end, mid-range and top end. Manufactured using a durable 15-5 ph one piece stainless steel casting, then polished to a gleaming mirror-like finish. They are backed by a limited lifetime blade failure warranty. Your prop is one of the essential links between your boat and the water. Carefully choose the prop that will best suit your application.Mercury/Mariner/Force O/B All V-6 O/B's except Mariner Magnum II, and Mercury XR-4 series.Mercruiser Sterndrive:All Mercruiser I, Alpha I, and Bravo I sterndrives. For the props above with the first digits of "ST103 and ST104" use Quicksilver #13171 thrust washer (Overton's part #24220). Important: These recommendations are for single engine installations only. For most twin engine installations, it is necessary to increase the pitch by 4". Warning: Due to the performance enhancing nature of the design, Quicksilver Trim Tab#. 46399A1 or AP 4004 (Overton's part #38459) MUST be used to avoid damage and/or injury. Exception: With Mariner Magnum II and Mercury XR-4 O/B's, use Quicksilver Anode Plate #. 15300 or equivalent. Note: 1997 and newer Mercury/Mariner O/B with 150hp plus or any Mercruiser I/O will need an aft washer (Overton's part #23395) for proper installation.