ROLL ON TO ZOOM IN
You May Also Likeback to top
detailsback to top
Product DescriptionThe unique high-rake, progressive pitch configuration is designed to help most boats achieve their best overall performance at all throttle levels;low end, mid-range and top end. Manufactured using a durable 15-5 ph one piece stainless steel casting, then polished to a gleaming mirror-like finish. They are backed by a limited lifetime blade failure warranty. Your prop is one of the essential links between your boat and the water. Please carefully choose the prop that will best suit your application.Mercury/Mariner/Force O/B All V-6 O/B's except Mariner Magnum II, and Mercury XR-4 series.Mercruiser Sterndrive: All Mercruiser I, Alpha I, and Bravo I sterndrives. For the Stiletto props above with the first digits of "ST103 and ST104" use Quicksilver #13171 thrust washer (Overton's part #24220).Important: These recommendations are for single engine installations only. For most twin engine installations, it is necessary to increase the pitch by 4"Warning:Due to the performance enhancing nature of the design, Quicksilver Trim Tab No. 46399A1 or AP 4004 (Overton's part #38459) MUST be used to avoid damage and/or injury.Exception:With Mariner Magnum II and Mercury XR-4 outboards, use Quicksilver Anode Plate No. 15300 or equivalent.Note:1997 and newer Mercury/Mariner O/B w/ 150hp plus or any Mercruiser I/O will need an aft washer (Overton's part #23395) for proper installation.
q & aback to top
Do you have questions about this product? 4 easy ways to get the answers you need:
• Live Help - Real time help for basic questions. click here
• Customer Service - Use our online contact center to contact customer service and receive a response usually within 24 hours.
• Product Expert - Use our online contact center to contact our Product Experts to receive a response usually within 48 hours.
• Answer Box - Get answers from real customers by clicking "Ask a Question" below.
get answers from real customers and in-house experts with AnswerBox.
1 Question | 2 Answers
Displaying question 1
Q:I have a 21' bowrider w/ a 5.0 L Merc Cruiser w/ Alpha One outdrive. Is this prop recommended for this boat? I have a 19 pitch now that is good for overall useage. Thinking that the 15 pitch would get out of the hole even faster, but how much of the top end will it cut out?Asked on 7/27/2009 by Wondering'bout props from Phoenix, AZ
A:Please contact our tech department. 1-800-334-6541Answered on 7/31/2009 by Casey Marine Buyer from Overtons
A:Please contact our tech department. 1-800-334-6541Answered on 8/7/2009 by Casey Marine Buyer from Overtons
Displaying question 1