Your Gandermountain.com Session is About to Expire!

What Would You Like To Do?

Renew My Session
Log Out

Rule-Mate Automatic Bilge Pump RM1100 - 1100 GPH

Item # 79810
Customer Rating:

Key Features

  • Non-mercury float switch allows automatic start

  • No power used until pump comes on

  • Large capacity pumping at a competitive price

  • Open Flow Capacity: 1100 GPH (gallon per hour)

  • 4.5"H x 5"W


Our Price   $99.99

Availability: In Stock

Free ship to store available for this item
Please make sure all selections are complete and a valid quantity is entered and try again.
Prices, promotions, styles and availability may vary by store and online.

You May Also Like

back to top

details & specs

back to top
Product Description
rule The Rule-Mate series of Automated Bilge Pumps features a pump and a non-mercury float switch in a single, compact housing. When the float rises, the pump turns on. There is no on/off cycling and, therefore, no power use until the pump comes on. The pump remains on until the float drops and the pump senses no load against the impeller. 1-1/8" hose output.
?
Specifications
Model RM1100A
Open Flow Capacity 1100 GPH
Automatic Yes
Amp Draw 3.4 amp
Hose Size 1-1/8"
Voltage 12V DC
Dimensions 4-1/2"H x 5"W

product reviews

back to top

REVIEW SNAPSHOT®

by PowerReviews
Rule-Mate® Automatic Bilge Pump RM1100 - 1100 GPH
 
3.0

(based on 3 reviews)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

Reviewed by 3 customers

Sort by

Displaying reviews 1-3

Back to top

3/29/2013
 
1.0

Pump runs constantly and drains battery

By Capt. Cliff

from Southeast Florida

About Me Professional

Verified Reviewer

Pros

    Cons

    • Poor Design

    Best Uses

    • Small Boats

    Comments about Rule-Mate® Automatic Bilge Pump RM1100 - 1100 GPH:

    Installed new 1100 pump to replace the one on customers vessel because it ran constantly on auto. I thought new pump would cure the problem, I did not. Pump is wired direct to battery. If power is turned off and then back on, the pump resets until the next time the auto turns on. Or, if you flood the bilge, it seems to work correctly. Can anyone help with this problem???????

    • Was this a gift?:
    • No

    Bottom Line No, I would not recommend this to a friend

    Was this review helpful? Yes / No

     - You may also flag this review

    5/15/2012
     
    5.0

    Totally satisfied!

    By Dun Packin

    from Sheridan MI

    About Me Casual/ Recreational

    Verified Buyer

    Pros

    • Easily installed
    • Good Performance
    • Quiet
    • Reliable
    • Weather Resistant

    Cons

      Best Uses

      • Personal Crafts

      Comments about Rule-Mate® Automatic Bilge Pump RM1100 - 1100 GPH:

      This pump works exactly as expected and was very easily instralled.

      • Was this a gift?:
      • No

      Bottom Line Yes, I would recommend this to a friend

      Was this review helpful? Yes / No

       - You may also flag this review

      4/18/2010

      (2 of 3 customers found this review helpful)

       
      3.0

      Bad Luck?

      By Taylork

      from Lake Erie, Ontario

      About Me Casual/ Recreational

      Pros

      • Easy To Install

      Cons

      • Stopped pumping

      Best Uses

      • Large Boats

      Comments about Rule-Mate® Automatic Bilge Pump RM1100 - 1100 GPH:

      This pump is very slick, easy to install, and worked great........for the first half of the season. Stopped working properly ie. would run all night and drain the battery, or not come on when there was water in the bottom of the boat. Will buy again......hope I just got a lemon.

      (2 of 3 customers found this review helpful)

      Was this review helpful? Yes / No

       - You may also flag this review

      Displaying reviews 1-3

      Back to top

      q & a

      back to top

      Do you have questions about this product? 4 easy ways to get the answers you need:

      • Live Help - Real time help for basic questions. click here
      • Customer Service - Use our online contact center to contact customer service and receive a response usually within 24 hours.
      • Product Expert - Use our online contact center to contact our Product Experts to receive a response usually within 48 hours.
      • Answer Box - Get answers from real customers by clicking "Ask a Question" below.

      get answers from real customers and in-house experts with AnswerBox.

      5 Questions | 5 Answers
      Displaying questions 1-5

      • Q:

        Does the rule 1100 need to be mounted level? My bilge and hull design is modestly V- shaped with the keel area 5/8 of a inch higher than my mounting location keeping the pump not quite level, please advise!
        Asked on 5/1/2010 by Anonymous from Sandusky Ohio

        1 answer

        • A:

          I would strongly suggest mounting this unit level. The internal float that automatically activates the pump will most likely get hung up if not level. This would cause the unit to turn on and stay on, draining the battery for no good reason.

          Answered on 5/8/2010 by Triumph 215CC from Long Island NY

      • Q:

        is the correct thru hull fitting for this pump 1100 GPH
        a 71786
        Asked on 12/17/2009 by pete from Spring Texas

        1 answer

        • CUSTOMER CARE

          A:

          Yes 7186, 74003 and 74006 can all be used.

          Answered on 12/22/2009 by Bob from Overtons Tech

      • Q:

        i lost the directions to my 1100. can i see the wiring instructions on the website?
        Asked on 7/23/2009 by Teague from Nanjemoy MD

        1 answer

        • CUSTOMER CARE

          A:

          Please contact our tech department at 1.800.334.6541 for further information

          Answered on 9/25/2009 by Jordan from Overton's

      • Q:

        I need a 1100 gph or greater bilge pump that will accept a 1 1/8th hose...what are the specs for you pumps?!
        Asked on 6/21/2009 by james from Batesville, AR

        1 answer

        • CUSTOMER CARE

          A:

          This item has a 1 1/8" hose barb connection.

          Answered on 6/25/2009 by Matt from Overtons

      • Q:

        Does this item come with the proper hook up wires or do you use the ones already on the boat?
        Asked on 5/11/2009 by Nick from Sparks Nevada

        1 answer

        • Staff Reviewer

          A:

          It comes with wiring. If the leads aren't long enough, I would suggest using new wires for a better performance

          Answered on 2/15/2011 by Toby from Overtons Tech. Dept.
      Displaying questions 1-5

      Do you have a question about this product?