You May Also Likeback to top
details & specsback to top
Product DescriptionSpecifically designed for sport and leisure watercraft, MariDeck is an exterior grade vinyl deck covering. High-tech polymer formulation repels water and moisture, preventing deck rot, while embossed surface texture provides slip-resistance. Designed with UV stabilizers, the deck covering will resist fading and endure long-term use. MariDeck vinyl is shipped directly from the manufacturer within 1-2 days from the time you place your order and takes approximately 5-10 business days for delivery.
These items are non-returnable and non-refundable. Sold by the running foot. For example, an order quantity of 20 will be a 6'W X 20'L roll. 15' minimum order.
Please order item #35337 for a free sample swatch card.
videosback to top
q & aback to top
Do you have questions about this product? 4 easy ways to get the answers you need:
get answers from real customers and in-house experts with AnswerBox.
Q:Will it lay down flat if you want to just lay it down over carpet with out attaching it, I just want to protect the carpet in my fishing boat with out removing the carpetAsked on 4/13/2012 by Anonymous from MN.
Q:Is this price of 12.99 per ft I have a 33ft boat. The bow has
a area of about 10'x12' and about 20" along both sides of the
cabin and about 24" across the stern. So how would I have to
order this? I would have alot of splices. Or there would be so
much waste. The boat is 12'x33' total. How do you seal the seams? is there some sort of strip to put over the seams so
they wont leak? Please let me know I would like to order your
product Thank You.Asked on 7/17/2009 by Larry G from Wausau WI.
A:Sold by the running foot. For example, an order quantity of 20 will be a 6'W X 20'L roll. 15' minimum order. Seaming this material is very difficult and is done by the manufacturer on custom widths by a dielectric weld. Contact cement could be used, but over time, will begin to curl. Typically, people will hot air weld a PVC material like this together. We can special order a specific width/length directly from the manufacturer if you would like. If you have any further questions, please feel free to contact our tech department at 1-800-334-6541Answered on 7/21/2009 by Ryan from Overtons
Q:Can this product be install on a cement deck?
Can it be seemed on site by an experienced do-it-yourselfer?Asked on 7/11/2009 by Anonymous from Frederick, MD
A:This product goes down with glue and there is no glue that sticks to concrete. This is strictly for wood, metal, or fiberglass applications.Answered on 1/25/2010 by Justin from Overton's
Q:How easy is it to install? We have a pool with vinyl covered plywood and the vinyl is now cracking (after 15 years). Would we need to pull up the existing vinyl or sand down to the plywood (i.e., remove residual adhesive from existing vinyl)?Asked on 6/30/2009 by Greg from Granby, CT
A:Installation is pretty easy once the prep work is done. It is recommended to remove the existing vinyl as well as the old adhesive to insure that the new adhesive and vinyl flooring adheres properly.Answered on 7/6/2009 by Ryan from Overtons
Q:Is the 12.99 the cost per linear foot or square yard..Asked on 5/7/2009 by Anonymous
A:This item is sold by the running foot with a 15' minimum order requirement. This info is now located under the Additional Details portion of our new site.Answered on 5/26/2009 by Ryan from Overtons
Q:how do you apply this floor covering to the surface of the boat?Asked on 4/27/2009 by guano
A:You will need to use an adhesive to attach it to the floor. For wood surfaces you would use 33957. For metal/fiberglass surfaces you will need to use 33959.Answered on 4/28/2009 by Matt from Gander Tech
A:You would need to apply with an adhesive.Answered on 4/28/2009 by Spencer from Gander Mtn
Q:How do you measure for installation of this productAsked on 2/2/2009 by Greg from Hattiesburg, Ms
A:You would basically just need to measure the area you need the vinyl. Just keep in mind this item is only coming in 6' increments.Answered on 2/9/2009 by Spencer from Gander Mtn