ROLL ON TO ZOOM IN
detailsback to top
Product DescriptionUnparalleled Short Range Target Discrimination - Where it Matters Most
Lowrance Broadband Radar provides amazing target resolution, even at an unprecedented 1/32 nm range. Docks, channel markers, moored vessels, and other critical targets are displayed with pronounced clarity and separation, for added safety and confidence in close quarters. Broadband Radar technology eliminates the "main bang" of pulse radar - an obscured viewing "dead zone" immediately around the boat that prevents display of any close-in hazards.
Virtually No Radiation for Safe, Flexible Installation on Any Boat
Lowrance Broadband Radar transmits at 1/10,000 the power of typical pulse radars, emitting 5-times less energy than an average cell phone! So, Broadband 3G Radar is safe to mount in locations never before possible. Plus, with the lowest DC power draw of any X-band marine radar, it's the first and only radar ideally suited for sailboats and other fishing or cruising boats with limited power.
Navigation in an Instant
No more waiting 2-3 minutes for a pulse radar magnetron to warm up. The 100% solid-state Broadband 3G Radar design provides InstantOn navigation in seconds. In darkness, fog, or foul weather, you can view your surroundings, near and far, instantly. Ideal for sailboats and other boats wanting to save power, especially at anchor.
Compatible with HDS High Definition System Displays
Antenna Beam Width Horizontal: 5.2° +/-10% (-3dB width)
Antenna Beam Width Vertical: 25° +/-20% (-3dB width)
Antenna Receiver Noise Figure: 6 dB
Antenna Rotation Speed: 24/36 rpm +/-10% RPMs
Radar Warm Up Time: 0 min
Radar Wind Resistance: 51 m/sec (max:100 knots)
Transmitter Frequency X-band: 9.3 to 9.4GHz
Transmitter Power Output: 165mW nominal
Data I/O Protocol: High Speed Ethernet
TECHNICAL / ENVIRONMENTAL
Mounting Bolts: 4x30xM8 made of 304 stainless steel
Waterproof Standard: IPX6
Height: 11" / 280mm
Diameter: 19.2" / 488mm
Weight: 16.31 lbs. / 7.4 kg
Humidity: +95°F / +35°C, 95% RH
Power Supply: 9 - 31.2vDC (12/24 volt systems) reverse polarity protection
Power Consumption: 18W (typical) @ 13.8vDC
Power Consumption Standby: 2W (typical) @ 13.8vDC ~ only 150ma
Compliance CE, FCC (ID: RAY3G4G), IC: 4697A-3G4G
Interconnection Cable: 33'/10m standard with RJ45 thin custom (max 30m)
Interface Heading: SimNet or NMEA 0183 with cable kit into display
Operating Temperature: +13°F to +131°F / -25°C to +55°C
q & aback to top
Do you have questions about this product? 4 easy ways to get the answers you need:
• Live Help - Real time help for basic questions. click here
• Customer Service - Use our online contact center to contact customer service and receive a response usually within 24 hours.
• Product Expert - Use our online contact center to contact our Product Experts to receive a response usually within 48 hours.
• Answer Box - Get answers from real customers by clicking "Ask a Question" below.
get answers from real customers and in-house experts with AnswerBox.
1 Question | 0 Answers
Displaying question 1
Q:What type of mounting hardware do you recommend for attaching to a 45' mast?Asked on 8/4/2012 by Diane from Monroe, WA
Displaying question 1