HeatStar Blue Flame Vent-Free Thermostat Control Gas Heater
Item # 778919
Factory installed blower fan & thermostat control
Battery operated electronic ignition
Floor or wall mountable
Works with standard inlet natural gas pressures
99.9% efficient design, no duct or outside venting
detailsback to top
Product DescriptionEnjoy the comfort and warmth of safe, clean-burning heat with the Blue Flame Vent-Free Gas Heater from HeatStar. With the ability to operate without electricity during power outages, this heater is an excellent heat source during uncomfortable winter periods. Includes factory-installed blower fan, thermostat, and electronic ignition. Heats 600 sq. ft. Built-in low-oxygen shut-off sensor (ODS system) shuts the unit down if it ever detects a possible problem. Easy to install. Tools required: Phillips screwdriver and pipe wrench. CSA/AGA certified.
• Heats up to 600 sq. ft.
• Includes factory installed blower fan and thermostat control
• Battery operated electronic ignition
• Redesigned front burner guard
• Vent-Free heater provides easy, economical installation, with no vent or chimney required
• Adjustable thermostat control.
• Floor or wall mountable (wall mount bracket and floor mount feet (2) included)
• Built-in blower
• Works with household standard inlet natural gas pressures between 9" and 14" WC
• 99.9% efficient design requires no duct or outside venting, so all the heat stays in the room
• Dimensions: 19"w x 24"h x 8"d
• Net Weight: 27 lbs.
• Clearances to combustible items: above: 36"
• Side: 10-1/2"
• Below: 2"
• Maximum Altitude: 4,500 feet
• Electrical power required for Blower Fan Only: 110v/60Hz 1 Amps
• Requires 3/8" NPT male inlet connection