You May Also Like
back to top
Mesh Gear Bag
$9.99
2" x 12' PWC Winch Strap
$10.99
details
back to topproduct reviews
back to topReviewed by 7 customers
Sort by
Displaying reviews 1-5
Previous | Next »
Pros
- Accurate
- Easy to Use
- Good Value
- Reliable
Cons
- Difficult to Install
Best Uses
Comments about HawkEye DF1120S Micro-Display Digital Depth Sounder:
Great tool in shallow waters, a bit tricky to install but great reading. I added clear silicone around the seams of the devise to make it waterproof.
- Primary use:
- Personal
Pros
- Easy to Install
- Easy to Use
Cons
- Not lighted
Best Uses
Comments about HawkEye DF1120S Micro-Display Digital Depth Sounder:
Easier to install than manual implies. I just taped it down with some vaseline inside the hull. It blasted through about 1" of fiberglass no problem. The major issue is that the unit is not lighted so it cannot be seen in the dark. Need to use a flashlight. Terrible omission.
- Primary use:
- Personal
Pros
- Easy To Install
Cons
- Not Weather Resistant
- Poorly Designed
Best Uses
- Indoor
- Large Boats
Comments about HawkEye DF1120S Micro-Display Digital Depth Sounder:
Failed within a season due to water infiltration
Pros
Cons
- Poorly Designed
Best Uses
- Indoor
Comments about HawkEye DF1120S Micro-Display Digital Depth Sounder:
I OWN A 28 FOOT DRY RIDE BOAT THE UNIT WORKED WONDERFUL 2 TIMES OUT. THE 3 TIME THERE WAS NO DISPLY BUT THE UNITS ALARM WAS GOING OFF IN 3O FOOT OF WATER. ( DO NOT BUY THIS UNIT IT IS NG AND WILL NOT HOLD UP )
Comments about HawkEye DF1120S Micro-Display Digital Depth Sounder:
We have made contact with the manufacturer regarding the issue and that they have taken precautions to make sure that this issue has been resolved. Please keep in mind that a saltwater application is harsher than regular freshwater. This is especially true with jet skis that are flip over many times in saltwater.
Displaying reviews 1-5
Previous | Next »
q & a
back to topDo you have questions about this product? 4 easy ways to get the answers you need:
get answers from real customers and in-house experts with AnswerBox.
Q:
Does this depth sounder have an on/off power button? What is needed to connect to boat's electrical system? THX.Asked on 8/17/2012 by Dan from Chesapeake0 answers
Q:
How far from the micro display can the transducer be?Asked on 9/2/2011 by Jim from Des Moines, Iowa0 answers
Q:
What is the fiberglass hull max thickness that the transducer will shoot thru?Asked on 1/23/2011 by bob from texas1 answer
A:
I'm shooting through at least an inch with no problem.Answered on 6/23/2011 by Jeff from Charlotte, NC
Q:
Will this transducer work in a 1992 Glastron 1700 inboard/outboard? New to this stuff.Asked on 7/31/2009 by ck from montana1 answer
CUSTOMER CARE
A:
It should work fine, these are not boat or model specific per say.Answered on 9/29/2009 by Bryant C from Tech Department
Q:
How long is the wiring I am looking into buying this for my new glastron and need to know if the wiring will reach from the back of the boat to the instrument panel?Asked on 7/27/2009 by Scooter from Wisconsin1 answer
A:
30 ft of cableAnswered on 10/7/2009 by Lauren K from Overton's Customer Service from Greenville, NC
Q:
Does this product have a backlit display?Asked on 7/23/2009 by Gdubb from Houston, TX1 answer
A:
yes the LCD screen illuminatesAnswered on 10/7/2009 by Lauren K from Overton's Customer Service from Greenville, NC
Q:
How, and where would you mount the transducer on a pontoon boat?Asked on 7/6/2009 by Paul from Rochester, MN2 answers
CUSTOMER CARE
A:
This unit is made to mount in a fiberglass hull. For a pontoon boat you will need a system that has a transom mount transducer.Answered on 7/9/2009 by Casey Marine Buyer from OvertonsA:
On pontoon boats and catamarans, mount on
the starboard hull at least 2" outside the hull
protector or centerline.Answered on 10/7/2009 by Lauren K from Overton's Customer Service from Greenville, NC
Q:
Is the sounder hard-wired into the display? Is it difficult to install?Asked on 6/2/2009 by Flipper from Millsboro, DE1 answer
CUSTOMER CARE
A:
The sounder should plug into the back of the display. It should not be overly difficult to install.Answered on 6/8/2009 by Donald from Overtons
Q:
What are the dimensions of the display gauge and how does it mount on the watercraft?Asked on 5/3/2009 by Anonymous1 answer
CUSTOMER CARE
A:
The overall dimensions of the display are 2"W X 1.1"H. It comes with a surface mount bracket that is secured with 2 screws and then the display clips into this bracket.Answered on 5/11/2009 by merchandiser from Overtons






