- GET MORE INFO
- details & specs
- |
- reviews
- |
- Q & A
You May Also Like
back to topdetails & specs
back to top|
Product Description
|
Specifications
|
product reviews
back to topREVIEW SNAPSHOT®
by PowerReviewsPros
- Easy to use (10)
- Well built / quality (6)
- Easy to install (4)
- Attractive (3)
Cons
Best Uses
- Small boats (4)
- Large boats (3)
- Reviewer Profile:
- Recreational (6), Advanced (4)
- Was this a gift?:
- No (3)
Most Liked Positive Review
Reinforcement needed
The product provided adequate coverage to my T-Top and center console for over a year. In South Florida when we have a front moving in we have sustained winds of 20-30 mph for a...Read complete review
The product provided adequate coverage to my T-Top and center console for over a year. In South Florida when we have a front moving in we have sustained winds of 20-30 mph for a length of time. This caused the canvas to tear on top in the back where the rod holders are. My wife sewed some canvas to reinforce the canvas where the holes started. A few months later another front came through and the canvas ripped where the light on top of the T-Top is and the canvas shredded to pieces. A few reinforcement at certain areas could make this a far superior product. I was satisfied enough to purchase another one, but my wife will reinforce the two spots before we use it.
VS
Most Liked Negative Review
T-top cover..
Top is very useful, BUT it needs a strap to wrap it in tight to the T-Top. First night I used it,we had a tstorm with high winds. If I had not wrapped...Read complete review
Top is very useful, BUT it needs a strap to wrap it in tight to the T-Top. First night I used it,we had a tstorm with high winds. If I had not wrapped the draw strings around the up right bars the top would be some where else. I added snaps to the top to snap to the exhisting snaps on the console. Now I will add a strap to help take the "play" out of the large "bag". Over all I like the design, just needs some (personal) improvements to "fit" each application.
Reviewed by 12 customers
Sort by
Displaying reviews 1-5
Previous | Next »
Pros
- Easy To Install
- Easy To Use
- Quality Construction
Cons
Best Uses
Comments about Covermate Cover For T-Top Up to 90"L x 66"W x 86"H:
Quick delivery--good price
- Was this a gift?:
- No
Pros
- Easy To Install
- Easy To Use
- Fit really well
- Quality Construction
- Was exactly as described
Cons
- Poor instructions
Best Uses
- Small Boats
Comments about Covermate Cover For T-Top Up to 90"L x 66"W x 86"H:
This covers all the essentials on a center console with T-top.Directions are worthless but installation is pretty simple. Design for bottom closure could be alot better but a couple well placed bungees secured the whole thing.Kept everything dry, clean and out of sight. Love it!
- Was this a gift?:
- No
Pros
- Easy To Install
- Easy To Use
Cons
Best Uses
- Small Boats
Comments about Covermate Cover For T-Top Up to 90"L x 66"W x 86"H:
Good cover for the winter
- Was this a gift?:
- No
Pros
- Easy To Use
- Waterproof
Cons
- Fabric deteriorates 2 yrs
Best Uses
- Center console
Comments about Covermate Cover For T-Top Up to 90"L x 66"W x 86"H:
Cover works as advertised, but I have to add grommets to allow additional tie downs to keep wind from blowing it off center console. Hot sun deteriorates fabric in 2 yrs. so that it rips easily even when installed. Warranty covers this product with no problems.
Pros
- Safe
- Waterproof
Cons
Best Uses
Comments about Covermate Cover For T-Top Up to 90"L x 66"W x 86"H:
I am having to install some additionl Snaps to keep it from blowing around but over all it is doing a great job!
Displaying reviews 1-5
Previous | Next »
q & a
back to topDo you have questions about this product? 4 easy ways to get the answers you need:
get answers from real customers and in-house experts with AnswerBox.
Q:
Can some one give me a clue or tip on how this should go up ? I have two antenna's. Do you start from the back or front? This does not seem to be a one man job. No tips or instructions with product other than tag telling me where the front is.. It would be pretty simple if no antenna's where up there.Asked on 7/12/2009 by MB from PC, Fl2 answers
A:
Put the cover on from back to front with the slot open to pass over the antennae. It can be done by one person with some patience.
I found that leaving the antennae sticking out in the sun, degraded the fiberglass on the top 2 feet on the ant. and when I slid the cover back over the ant. it shattered it. I had to buy a new ant.
I simply installed a connector in line with the ant. wire so that I could disconnect the lead and unscrew the ant. and remove it before putting the cover on.
Also, I made a PVC frame ( arched ) to sit on the T-Top to keep the cover from rubbing on the ant. mount, pole light and GPS ant.
I put a grommet in the center of the cover right at the hem and tie a rope to it , throw the rope over and slide the cover up on to the top and pull it over the arch to the front.Answered on 6/1/2010 by mtnskunkman from Sneads Ferry, N.C.VERIFIED BUYER
A:
Put your antennas in the down position. Locate the velcro opening for the antennas and open it to feed the antennas through the opening from the back of the T-top.The velcro strip shoud run directly across the back of the T-top. Then just feed the the cover toward the front and down. The first time is awkward but its pretty easy once you see how it fits and the configuration of your boat.I also bungeed the bottom securely otherwise I think it would balloon and come off in a stiff wind. I also placed foam coozies on my rod holders AFTER the cover was on to protect it from rubbing holes in the cover. Hope that helps.Good luck.Answered on 5/16/2012 by you and me from Little River SC
Q:
Can't relate to what the material is. Is it similar to those blue or gray tarps. I'm concerned about how it will hold up especially on the rocket launchers on top of the T-Top.Asked on 6/24/2009 by Anonymous1 answer
CUSTOMER CARE
A:
It is made of 6 oz polyester which is a common boat cover material. Most of the blue or gray tarps are made of woven nylon which have more of a plastic feel. The polyester is a much better material. We also offer reinforcement material (item 73511) that sticks to the underside of the cover to protects areas of the cover for things like rod holders.Answered on 6/25/2009 by Michael from Overtons
Q:
Have a 21' angler hudson bay 204 C/C with fixed T-top with rocket launchers on rear (top) of the T-Top will this cover fit my boat.Asked on 6/5/2009 by Frank from North Arlington,NJ2 answers
CUSTOMER CARE
A:
Thank you for your inquiry. Unfortunately you would need to measure your T-Top to ensure proper fit.Answered on 6/8/2009 by Donald from OvertonsA:
There is a velcro strip on the cover at the back of your t-top. Open it and place atntenna there and close the velcro.Answered on 9/13/2010 by Pete from Burleson, Tx





