Save 10% on all orders use code SCARY ends 11/1

Your Gandermountain.com Session is About to Expire!

What Would You Like To Do?

Renew My Session
Log Out
Free Shipping on Orders over $50 | Free Shipping & Returns on Apparel & Footwear

Cook Electric Hydraulic PT-35 Tilt and Trim

Item # 21204
Customer Rating:

Key Features

  • Improved fuel efficiency

  • Fingertip control

  • 84 trim and tilt

  • Totally waterproof electric hydraulic system

  • Rated at over 7,800 lbs. of thrust


Our Price   $579.99

Availability: Ships within 2-4 business days

  • Additional discounts do not apply.
Please make sure all selections are complete and a valid quantity is entered and try again.
FREE IN-STORE PICK UP Find in StoreFind in Store
Prices, promotions, styles and availability may vary by store and online.

You May Also Like

back to top

details

back to top
Product Description
cook_mfg Enjoy superior performance with this powerful, electric hydraulic tilt and trim from Cook. Experience better boat handling, more speed, and lower fuel consumption, while also saving your back with fingertip control. With a total of 84° of trim and tilt, you can tuck your motor in so your boat planes smoother and faster. Once under way, change the angle of your motor for the best performance for your load and water conditions. Actuated with a totally waterproof electric hydraulic system that is rated at over 7,800 lbs. of thrust. Transom mounting bolts not included.

PT-35 Tilt and Trim - Smaller and lighter for 35 hp motors and smaller. Works with clamp-on or bolt-on motors. 5-1/2" set back.

product reviews

back to top

REVIEW SNAPSHOT®

by PowerReviews
Cook Mfg.Cook Electric Hydraulic PT-35 Tilt and Trim
 
4.0

(based on 6 reviews)

Ratings Distribution

  • 5 Stars

     

    (3)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (1)

  • 1 Stars

     

    (0)

83%

of respondents would recommend this to a friend.

Pros

  • Good performance (4)

Cons

    Best Uses

    • Small boats (3)
      • Was this a gift?:
      • No (3)

    Reviewed by 6 customers

    Sort by

    Displaying reviews 1-5

    Back to top

    Previous | Next »

     
    5.0

    PT-35 T&T Excellent Product

    By Chief Chad

    from Alamogordo,NM

    About Me Casual/ Recreational

    Verified Reviewer

    Pros

    • Good Performance
    • Reliable
    • Weather Resistant

    Cons

      Best Uses

      • Large Boats
      • Small Boats

      Comments about Cook Mfg. Cook Electric Hydraulic PT-35 Tilt and Trim:

      Installed the PT-35 on my Alumacraft Fisherman 145 CS with Suzuki 25 HP 4-stroke(heavy motor-162 lbs.)four years ago.It was easy to install and has performed flawlessly.Definetly a back saver for us old farts.If you follow the install instructions and operate it according to the manual you won't have any problems.Good product for a reasonable price.

      • Was this a gift?:
      • No
       
      5.0

      pt-35 tilt and trim by cook

      By na

      from ottawa canada

      About Me Casual/ Recreational

      Pros

      • Good Performance

      Cons

        Best Uses

        • Personal Crafts

        Comments about Cook Mfg. Cook Electric Hydraulic PT-35 Tilt and Trim:

        the lake i am located on is shallow in many areas this product worked excellent allowing me to go in any area with no difficulty when i purchased it delivery was excelent no problems i have no complaints

        • Was this a gift?:
        • No

        (1 of 1 customers found this review helpful)

         
        5.0

        Backsaver

        By Sailor George

        from Germantown, TN

        About Me Recreational

        Pros

        • Good Performance
        • Quiet
        • Reliable

        Cons

          Best Uses

          • Small Boats

          Comments about Cook Mfg. Cook Electric Hydraulic PT-35 Tilt and Trim:

          This truly is a back saving device. It works as advertisd and is clearly a well designed peice of equiptment.

          (1 of 1 customers found this review helpful)

           
          4.0

          No more back-breaking engine-tilting!

          By AAK!

          from Middle-of-Nowhere, Florida

          About Me Advanced

          Verified Buyer

          Pros

          • Good Performance

          Cons

            Best Uses

            • Small Boats

            Comments about Cook Mfg. Cook Electric Hydraulic PT-35 Tilt and Trim:

            We have a smaller outboard (15hp), but it still is quite awkward and heavy to repeatedly tilt the engine up and down by hand. We use this boat daily, so the engine goes up/down at least twice per day. So far, this hydraulic tilt is working fine. You can even adjust it "on the fly" to alter the way the boat planes on the water. Our only complaint is that you have to be careful when tilting the engine up. The motor mounting bolts can be crushed because there is not enough room as the hydraulic plate tilts up. It tilts up enough to lift the lower unit out of the water, however. You just have to be cautious not to go beyond a certain point.

            • Was this a gift?:
            • No

            (1 of 1 customers found this review helpful)

             
            3.0

            It's ok

            By Mysticwolf

            from Auburn Indiana

            About Me Competitive

            Pros

            • Easy To Use
            • Waterproof

            Cons

            • Heavy

            Best Uses

            • Personal Watercraft

            Comments about Cook Mfg. Cook Electric Hydraulic PT-35 Tilt and Trim:

            I just installed the pt 35 on my 15' Jon boat, with a 25 H.P. nisson, and it worked the first 2 times I used it, then quit. I have not had the customer service contact me yet, emailed them 4 days ago, but it is the week end, plus a holliday, so I figure it will be a couple more days. I hope I ge t it working soon, I am missing out on alot of duck hunting. It is a nice unit, and works great when its working.

            Displaying reviews 1-5

            Back to top

            Previous | Next »

            q & a

            back to top

            Do you have questions about this product? 4 easy ways to get the answers you need:

            • Live Help - Real time help for basic questions. click here
            • Customer Service - Use our online contact center to contact customer service and receive a response usually within 24 hours.
            • Product Expert - Use our online contact center to contact our Product Experts to receive a response usually within 48 hours.
            • Answer Box - Get answers from real customers by clicking "Ask a Question" below.

            get answers from real customers and in-house experts with AnswerBox.

            7 Questions | 6 Answers
            Displaying questions 1-7
            • Q:

              I have a 48 Johnson will it work are is it two big of a motor
              Asked on 3/6/2014 by dirty from baton rouge la.

              1 answer

              • Staff Reviewer

                A:

                Hello Dirty,

                No. The PT-35 is only designed for engines of 35 HP or smaller.

                Thank you,
                Steve

                Answered on 3/7/2014 by Anonymous
            • Q:

              I have twin 1994 yamaha 2 stroke motors would this product be able to work well or need to up grade to the pt-130
              Asked on 8/1/2012 by dafrog from Hawaii Island, Hawaii

              1 answer

              • Staff Reviewer

                A:

                These are based on horse power and there are 2 models. One is for 35hp or less and this one is for 35-130hp motors. Order according to your horse power.

                Answered on 11/7/2012 by Justin M. from Overton's
            • Q:

              I have a pontoon with a 30 hp will I need anything extra for this to work. were can the switch be mounted ?.. thank you
              Asked on 6/28/2012 by kirk from wisconsin

              1 answer

              • Staff Reviewer

                A:

                Based on the information you provided I can not tell if you need anything more, but I can tell you that most people mount the switch on the console or dash

                Answered on 10/15/2012 by Justin M. from Overton's
            • Q:

              I have a 25HP four stoke will this still work
              Asked on 10/23/2009 by buzz2001 from huntsville, texas

              0 answers

            • Q:

              lost manual for a pt35 how do install?
              Asked on 8/24/2009 by jim from nc

              1 answer

            • Q:

              will this PT-35 Tilt @ Trim fit any mid 1970s Johnson outboard motor?
              Asked on 7/30/2009 by Anonymous

              1 answer

              • CUSTOMER CARE

                A:

                This will work with any brand and any year outboard motor that is a clamp on or bolt on application that is UNDER 35 horsepower. If your HP is over that then you will need the bigger one.

                Answered on 9/30/2009 by JUSTIN from OVERTON'S TECHNICIAN
            • Q:

              I have a 2000 DF30 Zuzuki boat motor will this fit my motor?
              Asked on 6/3/2009 by Anonymous

              1 answer

              • Staff Reviewer

                A:

                Yes

                Answered on 3/10/2011 by Justin from Overton's
            Displaying questions 1-7

            Do you have a question about this product?