My Account X
You May Also Likeback to top
detailsback to top
q & aback to top
Do you have questions about this product? 4 easy ways to get the answers you need:
get answers from real customers and in-house experts with AnswerBox.
Q:IS THIS PRODUCT MADE OF METAL OR PLASTIC?Asked on 10/23/2009 by BIG AL from TEXARKANA ARK.
A:It is made of metal, not plastic.Answered on 10/28/2009 by Bryant C from Tech Department
Q:what is the dimension outside (diameter)?Asked on 9/26/2009 by hollywood from atlanta
A:3-1/8"Answered on 9/30/2009 by Bryant C from Tech Department
A:Item 70992 is 12"x12' and that would almost cover the back.
item 76098 is 24"x12' and that would be a bit of over kill.
That is going to be the closet we have to what you are looking for.Answered on 9/30/2009 by Bryant C from Tech Department
Q:what is the distance between holes?Asked on 9/26/2009 by Anonymous
A:They are about 1 3/4 inches apart.Answered on 10/9/2009 by Bryant C from Tech Department
Q:i need a gas cap to fit a 2008 super air nautique 230Asked on 9/5/2009 by Anonymous
A:We cannot cross reference what cap is needed for any make, model and year of boat. You will need to figure out what is the inside diameter of your hose, then choose accordingly from our selection.Answered on 9/11/2009 by Bryant C from Tech Department
Q:how does it turn open? it doesnt look like it has a handle.Asked on 7/20/2009 by joe from il
A:You use the raised tabs to twist off and on.Answered on 7/28/2009 by Matt from Overtons
Q:I need to know dementions of this item to be sure it will fidAsked on 5/11/2009 by Anonymous
A:The dimensions of this item is listed below:
The flange (outside to outside) are 3-1/8" and this item takes a 1-1/2" gas fill hose.Answered on 5/22/2009 by Brooks, Marine Buyer from Overtons
Q:Need size of thru fittingAsked on 5/11/2009 by Anonymous
A:The Chrome Plated Gas Fill has the following dimensions:
3-1/8" Flange (Outside to Outside)
1-1/2" Hose Accommodation
If you have any further questions please contact us here at Overton's at 1-888-OVERTON and any of our Technical Product Specialist will be glad to assist you.Answered on 5/27/2009 by Brooks, Marine Buyer from Overtons
Q:I NEED TO KNOW WHAT THE MESUREMENTS ARE?Asked on 5/3/2009 by Anonymous
A:The measurements of the Chrome Plated Gas Fill are as follows:
The flange (outside to outside) is 3-1/8" and this gas fill takes a 1-1/2" hose.
If you need any further information please do not hesitate to contact us here at Overton's.Answered on 5/22/2009 by Brooks, Marine Buyer from Overtons