detailsback to top
videosback to top
q & aback to top
Do you have questions about this product? 4 easy ways to get the answers you need:
get answers from real customers and in-house experts with AnswerBox.
Q:does this skeg guard have a water drain hole in it??Asked on 11/28/2013 by Booya from Maryland
A:Yes.Answered on 12/3/2013 by Anonymous
A:The Blackfin Skeg does have drain holes.Answered on 12/3/2013 by Anonymous
Q:i have an 150 hp Yamaha with dual props lower unit measurres 17" does a large fit it r is their an extra largeAsked on 6/29/2012 by mojoronnie
Q:Is this item good for repair also? If so, how much of the old skeg, (in my case it was broken off), does there have to be to attach the black fin?Asked on 5/29/2012 by Anonymous
Q:I have a Yamaha V150TLR VMAX outboard will it fit my Skeg?Asked on 2/19/2011 by heartsaver from Arkansas
A:Yes and you need to measure your skeg according to the drawing on the additional views to know what is the correct size for your motorAnswered on 2/22/2011 by Justin from Overton's
Q:I want to make sure I order the right size. I have a 1997 Celebrity 180/ 4.3 motor with mercuiser alpha. Anyone have any idea of size?Asked on 7/8/2010 by Larry from Martinsburg, WV
A:The small Blackfin fits the Alpha One like a glove.Answered on 8/7/2010 by Red Rider from Dallas, TX
Q:what size do i need for a 1970 85 horse power johnson outboard?Asked on 4/26/2010 by Anonymous from denver colorado
A:It says you are supposed to measure the lower unit from the prop forward.The Bullet.Answered on 8/7/2010 by The Bucket from Jackson, MS
Q:please explain how to measureAsked on 9/28/2009 by Anonymous
A:All you need to do is measure the gear housing. If you need any further assistance, please contact our tech department at 1.800.334.6541.Answered on 10/2/2009 by Jordan from Overton's
A:measure the length of the lower unit, not the actual skeg. The lower unit measurement is what you need.Answered on 11/14/2009 by Red River Runner from Houston,TX
Q:how does the skeg fit around the oil drain plug?Asked on 9/9/2009 by Anonymous from syracuse,ny
A:There will be a recessed area in the skeg to accommodate the oil drain.Answered on 9/11/2009 by Matt from Overton's Tech.
A:shave a half moon on the top edge with a razor knife.Answered on 11/14/2009 by skibo from venice, LA
Q:What are the overall dimensions of the product?Asked on 8/24/2009 by Anonymous
A:It depends on whether it is a small medium or large as to the dimensions. In order to find one that will fit your engine you need to measure your gear case as shown in the last alternative view in the product's information to see which one will fit.Answered on 9/4/2009 by JUSTIN from OVERTONS TECHNICIAN
Q:If I ever have to take the skeg off, how then would I get It off once It Is glued on ??Asked on 8/16/2009 by Anonymous
A:You would probably have to use a heat gun to accomplish this.Answered on 9/11/2009 by Matt from Overton's Tech.
A:You have to cut it off in pieces & use a wire wheel to get the adhesive offAnswered on 9/11/2009 by Troyfus from Santa Maria Ca.
A:Take a 1" wood chisel. Get under the adhesive and tap with a hammer. Skins it right off in one pass.Answered on 11/14/2009 by bottomplow from Denver, CO