detailsback to top
Maximum amp draw: 3 amps. 108 dB rating. 3"L x 3-1/4"W x 1-3/4"H. Use low pitch horn for single installation.
q & aback to top
Do you have questions about this product? 4 easy ways to get the answers you need:
get answers from real customers and in-house experts with AnswerBox.
Q:What is the spacing on the mounting screws?Asked on 8/22/2012 by Steve from NY
Q:Does this have a mounting option to fit existing 4 1/2 inch width screw holes?
thxAsked on 9/6/2011 by Anonymous
Q:Is this horn waterproof?Asked on 3/31/2011 by wemily
A:yesAnswered on 6/15/2011 by silkworth from Lake Silkworth, PA
Q:I have a 18-6" boat Tracker Targa with no horn. Do you have a installation instructions, would like to operate off a switch. Looking for wiring and install suggestionsAsked on 1/29/2010 by Phil from Elk River, MN
A:Please contact our technical department at 1.800.334.6541.Answered on 2/5/2010 by Jordan from Tech
Q:will this horn fit a Rinker 243 Year 2001 deck boat?Asked on 12/16/2009 by Anonymous from Grand Haven, MI
A:They are universal and have no specific models they fit. I am unfamiliar with your boat. 3" L x 3-1/4" W x 1-3/4" H There are the dimensions you can reference.Answered on 12/17/2009 by Bryant from Tech
Q:Do you have any technical illustrations showing the overall dimensions of the horn and measurements of the mounting holes on this?Asked on 8/24/2009 by Wayne from Iowa
A:Stainless Steel Mini Drop-In Single • 12 Volt Lo Pitch
Dimensions: 3” L, 3-1/4” W, 1-3/4” H (7.5 x 8 x 4.5 cm)
Max Amp Draw: 3 Amps. Grill Dimensions: 4-7/8” x 2-3/8”
with 4” hole centers. Rating 106 db @ 1 Meter Installed • FF: 410 Hz + 2Answered on 9/17/2009 by Bryant C from Tech Department
Q:Need a replacement horn for our 2004 Sea Ray 240 Sundancer. It looks very similar to your "All SS Mini Drop-In with Low Pitch" by Ongaro.
Is this the correct horn for our boat?Asked on 7/27/2009 by Dave from Oldsmar, FL
A:Please contact your local dealer to see what brand is used by Sea Ray.Answered on 7/31/2009 by Casey Marine Buyer from Overtons
A:It is possible, Ongaro is a popular brand for boat builders. I would contact your local dealer and ask which brand Sea Ray uses.Answered on 7/31/2009 by Casey Marine Buyer from Overtons
Q:Im looking for a drop in replacement horn for a 07 larson 180 sportAsked on 7/20/2009 by sm from yarmouth ma
A:None of our horns are application specific so you should be able to wire any of them to a power, ground, and momentary switch and they work just fine. So, yes this and any of our other horns should work for you depending on the mounting space available on your boat.Answered on 1/14/2010 by Justin from Overton's Technician
Q:WHAT ABOUT THE DUALONGARO HORN, #72614, WILL IT FIT IN THE SAME HOLE AS THE SINGLE?Asked on 7/18/2009 by HASSY from ASHLAND.O.
A:item 72614 is a total of two horns that are both 3" L x 3-1/4" W x 1-3/4" H. So you will need two holes instead of just one. They are the same size as just the single though.Answered on 1/21/2010 by Justin from Overton's Technician
Q:Is the horn constructed of 100% corrosion-free materials or does it contain iron components?Asked on 6/5/2009 by Anonymous
A:I can not say that this horn is 100% corrosion-free.Answered on 6/8/2009 by Casey Marine Buyer from Overtons