Recoil Reduction
|
 |
Reduces recoil in most calibers by 50% or more. Available in stainless or blued.8° forward angle ports direct blast away from shooter.
Installation only |
$100.00 |
| Upcharge for Auto rifles like Browning BAR or Remington 7400 |
$40.00 |
| Custom Muzzle Cap designed to protect the threads when the brake is removed and makes the barrel look as though no alterations were ever made. Each cap is custom made to your barrel specs. |
$50.00 |
| Our Gunsmiths can also custom fit your brake by polishing the barreled action and brake together and then rebluing. |
$75.00 |
|
|
Reduces recoil in most calibers by 50% or more. Available in stainless or blued.8° forward angle ports direct blast away from shooter.
Installation only |
$100.00 |
| Upcharge for Auto rifles like Browning BAR or Remington 7400 |
$40.00 |
| Custom Muzzle Cap designed to protect the threads when the brake is removed and makes the barrel look as though no alterations were ever made. Each cap is custom made to your barrel specs. |
$50.00 |
| Our Gunsmiths can also custom fit your brake by polishing the barreled action and brake together and then rebluing. |
$75.00 |
|
|
| Your number one source for porting camouflage, shotgun, or muzzleloader barrels. All done by EDM, Topline offers a 23.5 degree angle Proline Teardrop styled porting for less muzzle jump and wad plastic buildup. Get the most out of your gun with this innovative modification! |
|
| Shotgun Barrel Porting (prices are per barrel) |
|
| Standard Porting |
$85.00 |
| Heavy barrel/slug |
$100.00 |
| Extended porting |
$100.00 |
| Camouflage barrel porting |
$115.00 |
| Heavy/slug with camo |
$115.00 |
| Painted barrel porting |
$115.00 |
| Rifle barrel porting |
$135.00 |
| *A shipping fee of $15.00 for each job is also required. |
|
|
|
 |
|
| SHOTGUN PORTING |
|
| There are two stages of perceived recoil when a shotgun is fired: the first is the result of primary ignition, the second the consequence of expanded propellant burn-off at the muzzle. The ports dissipate shock and, because of their design and placement, redirect muzzle energy to dramatically reduce muzzle lift. For the Shooter this translates into a reduction of perceived recoil of 15 to 20 percent, and an average of 60 to 80 percent reduction in muzzle lift! Pro-Porting has proven effective on shotguns of all types, single, over/under, side-by-side, rifled, and slug barrels. |
| Pump & Auto shotguns |
$95.00 |
| Over & Under both barrels |
$150.00 |
| Over & Under bottom barrel only |
$115.00 |
| Side by side both barrels |
$115.00 |
|
|
| Our Pigeon Port design is an enhancement to the porting design consisting of five additional ports extending back from the top row of the Pro-Port pattern. This style of porting is recommended for shooters using 23/4 dram equivalent or higher loads. It provides up to an additional 5% reduction in recoil and is great for use with pressure first shot, doubles, and in flyer tournaments. The extra pigeon porting is not recommended for gas or recoil operated guns and is not available on barrels under 24 inches. |
|
| Pigeon porting when done at the same time as standard porting (price per barrel) |
$30.00 |
Pigeon porting when done after a barrel has already been ported with the
standard configuration (price per barrel) |
$75.00 |
|
|
| PORTING UP CHARGES |
|
| * Barrels coated with nonconductive finishes such as teflon or camo coating require an additional charge |
$20.00 |
| *Heavy or bull barrels require an additional charge |
$20.00 |
| *Rifles with banded ramped front sights (two ports) |
$105.00 |
| *A shipping fee of $15.00 for each job is also required. |
|
|
 |
|
| Rifle Porting |
|
| Competitive shooters and hunters know the importance of being able to squeeze off a fast, accurate second shot. Mag-na-port offers shooters a recoil reduction of about 15% with its four port rifle system |
$140.00 |
|
|
|
|
| HANDGUN PORTING |
|
Traditional Mag-na-porting of a handgun consists of two trapezoidal
ports cut into the barrel approximately 1/2 inch from the muzzle. These ports are placed at approximately 35 to 45 degree angles. For the shooter, this translates into a reduction of perceived recoil of 15 to 20%! Can be done on barrels of any length |
$95.00 |
| Two ports on revolvers with shrouded barrels like Dan Wesson or Smith & Wesson Scandium models |
$150.00 |
| Four ports on Smith & Wesson Model 500 or 460 |
$210.00 |
| Revolvers or Thompson Center Contenders or Encores with barrels 7.5" to 16" we recommend a four port configuration |
$125.00 |
| Auto pistols Mag-na-port offers a unique system of porting semi-automatics by using a trapezoidal port through the barrel and an oversized expansion vent through the slide to allow maximum dissipation without fouling. This process offers an alternative to shooters not wanting additional weight or length from add on compensators |
$140.00 |
|
|
Looking for the most effective and trouble-free recoil reducer on the market?
Mercury Reducers are the answer! Because mercury systems utilize a liquid, these systems never stick, rattle or vibrate like spring & weight systems can. Confidence is often shaken by painful recoil. Gain that confidence back by making your firearm more comfortable to shoot.
|
|
| |
| STOCK MODEL |
|
Available in two sizes
7/8" diameter by 3" long, 8oz weight
|
$44.99 |
| 7/8" diameter by 4" long, 11oz weight |
$44.99 |
| Installation (starting at) |
$30.00 |
|
|
| BERETTA MAGAZINE SUPPRESSOR |
|
Beretta 391
Just replace the magazine cap for instant recoil reduction.
Tough baked on black finish (No Gunsmithing required) |
$59.99 |
|
|
| BERETTA MAGAZINE SUPPRESSOR |
|
Beretta 301-302-303 & 390 Automatics.
Just replace the magazine cap for instant recoil reduction and a smoother swing. All stainless steel with satin finish (No Gunsmithing required) |
$59.99 |
|
|
| BERETTA / BENELLI SUPPRESSOR |
|
Replaces the stock retaining nut.
Two models available: 11oz for synthetic stock and 8oz for wood stocks |
$49.99 |
| Installation |
$10.00 |
|
|
| BARREL CLAMP SUPPRESSOR |
|
Sturdy aluminum clamp allows this unit to be installed on any 12ga barrel.
8oz weight. Just slide up or down barrel to achieve perfect balance and
improved swing (No Gunsmithing required) |
$59.99 |
|
|
| CHAMBER SUPPRESSOR |
|
Drops into the unused barrel of your over under while shooting single
targets. 12ga only (No Gunsmithing required) |
$59.99 |
|
|
| MAGAZINE SUPPRESSOR |
|
Replaces the plug in most pumps and autos that hold four shells in the
magazine tube (No Gunsmithing required) |
$59.99 |
|
|
 |
