General Labor Rates
|Inspect firearm and prepare written quote||$40.00|
|Professional scope mounting and boresighting||$30.00|
|Professional scope mounting and boresighting / includes lapping in the rings||$50.00|
|Labor Half Hour||$40.00|
|Labor One Hour||$80.00|
Custom 1911 Service
|Tighten and lap slide and frame to a perfect "one to one" fit||$140.00|
|Fit and install barrel bushing left paren (does not include cost of bushingleft paren)||$80.00|
|Bevel magazine well (bluing additional)||$60.00|
|Checker front strap of 1911 style frame left paren (available in 20, 25 or 30 lines per inch)||$240.00|
|Serrate rear of slide (less extractor) to 40 lines per inch (refinishing may be additional)||$50.00|
|Lower and flare ejection port (bluing additional)||$60.00|
|Polish barrel and feed ramp, starting at||$80.00|
|Fit custom trigger, does not include cost of trigger||$60.00|
|Fit custom hammer, does not include cost of hammer||$100.00|
|Mill slide for low profile rear sight||$160.00|
|Mill slide for front dovetail sight||$60.00|
|Install stake on front sight, does not include sight||$60.00|
|Install extended magazine release, does not include mag release||$40.00|
|Modify frame for beavertail grip safety, does not include safety or refinishing||$100.00|
|Mill cocking serrations in the front of the slide, refinishing additional||$80.00|
|Install extended ejector for increased reliability (rear of ejector is cold blued after fitting)||$60.00|
|Fit and install custom extended or ambidextrous safety lever, does not include safety lever||$40.00|
If you want smooth contours, this is the conversion for you. All corners are broken and blended resulting in an ultra-soft carry gun. Have your 1911 "Liquefied" today. Includes all hand-polishing, bead blasting and standard bluing. (Epoxy, nickel or Teflon finishes additional.)
The best gun oil is the gun oil that is actually used. Far too many gun owners fail to properly clean and lubricate their firearm. When purchasing a firearm it must be field stripped, cleaned and lubricated before use.
1911 Performance Bundles
Completely disassemble, clean, check, and test fire, install Wolff custom recoil spring, firing pin, main and sear springs, tune the extractor, polish breech face, feed ramp and disconnector rail.
Completely disassemble, clean, check, and test fire, Install Novak fixed low mount rear sight and dovetail front sight, trigger job (4lbs), tune extractor, polish breech face, feed ramp and disconnector rail.
Completely disassemble, clean, check, and test fire. Install Trijicon night sights, Wilson beavertail grip safety, Cylinder & Slide Tactical II trigger pull kit (includes 4lb pull, skeletonized tactical hammer with relieved sides to eliminate frame rub, ultra match sear and disconnector, light sear spring and 18lb hammer spring), Ed Brown tactical safety, Wilson extended slide release, tune extractor polish breech face, feed ramp and disconnector rail.